Im a total noob to the whole Raspberry realm, and I decided to try my hand at a few implementations. I've successfully setup two SD cards, for Openelec, which I'm currently using as my media server and one for RasPbx, which I intend to use as a home intercom system.
I have followed your guide at http://www.forum.pimodules.com/viewtopic.php?f=12&t=212 on setting up the Pico Ups, but I cant seem to get the UPS working.
when powered on, the green UPS led, the Blue and Red D6 & D5 leds flash and after a few seconds the UPS shuts of completely. When I press the UPSR button, the process is repeated an then it shuts off again.
I have installed I2c tools and python per your instruction, also copied the picofssd.py script to Home/pi ( I created the /pi directory as I was unable to find this)
I have also edited the rc.local file according to your provided sample.
My problem is, the UPS doesn't seem to be functioning as none of the leds are active, also when I run the command: python /home/pi/picofssd.py as per the rc.local setup, I get the following error
please see attached photo.
any help on setting this up the right way would be greatly appreciated.
Uninterruptible Power intelligent Supply Module
2 posts • Page 1 of 1