3D Step File, Solidworks, and DXF

Uninterruptible Power intelligent Supply Module
Post Reply
cswanson
Posts: 1
Joined: Wed Mar 11, 2015 7:35 pm

3D Step File, Solidworks, and DXF

Post by cswanson » Wed Mar 11, 2015 7:59 pm

Where do I get a 3D model of the board? I am interested in a DXF file as well as a 3D Step file. I am using Solidworks 2014 so an assembly or part file would work best.
Thanks,
Craig

User avatar
Pimaster
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: 3D Step File, Solidworks, and DXF

Post by Pimaster » Thu Mar 12, 2015 2:15 pm

Hi,
I will publish them later on, today late at the evening (only step, and DXF) will check if cad.cam can generate solidworks, we are using the PADS system for PCB design (www.pads.com)
Warmest Regards
PiM
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---

User avatar
Pimaster
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: 3D Step File, Solidworks, and DXF

Post by Pimaster » Fri Mar 13, 2015 11:06 pm

Hi, for the UPiS we have only DXF files, is it OK with you ??
Please advise
BR PiM
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---

Post Reply