firmware 1.096 proble with start/stop command

Uninterruptible Power intelligent Supply Module
Post Reply
pepino
Posts: 8
Joined: Thu Feb 05, 2015 11:37 am

firmware 1.096 proble with start/stop command

Post by pepino » Mon Feb 09, 2015 6:04 pm

I rentely update the firmware UPIS to 1.096 and now the start/stop command not work.
@stats
[...]
Battery Charger ON
Low Power Restart Time (LPRSTA) is 5 seconds

Raspberry Pi timed shutdown is every 2 Minutes
Raspberry Pi timed shutdown timer value is now 1 Minutes

Raspberry Pi timed start-up is every 2 Minutes
Raspberry Pi timed start-up timer value is now 0 Minutes

File Safe Power Cut-Off Time is: 30 Seconds
File Safe Shut Down type is: RPi NOT Powered while sleep
File Safe Unconditional Shutdown when Power loose Timer is OFF, UPiS will work until battery discharged
Real Time Clock Correction Factor value is: 0x00
[...]

Shutdown my Rpi with the command "shutdown -h now" and teh RPi not start pass a few minutes.
With te firmware 1.00 this work correcty. Why?

pepino
Posts: 8
Joined: Thu Feb 05, 2015 11:37 am

Re: firmware 1.096 proble with start/stop command

Post by pepino » Mon Feb 09, 2015 6:44 pm

It's 1.096 beta version.

pepino
Posts: 8
Joined: Thu Feb 05, 2015 11:37 am

Re: firmware 1.096 proble with start/stop command

Post by pepino » Mon Feb 09, 2015 6:45 pm

It's 1.096 beta version.

pepino
Posts: 8
Joined: Thu Feb 05, 2015 11:37 am

Re: firmware 1.096 proble with start/stop command

Post by pepino » Mon Feb 09, 2015 9:52 pm

When change the ffsd type a 0x01 "File Safe Shut Down type is: RPi Powered while sleep" the start/stop work correcty. Why not in ffsd type 0x00???

User avatar
Pimaster
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: firmware 1.096 proble with start/stop command

Post by Pimaster » Wed Feb 11, 2015 10:44 pm

Hi, There is bug in the firmware. It is corrected in the new one 2.0 we are working on.

Warmest regards
Pi Master
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---

pepino
Posts: 8
Joined: Thu Feb 05, 2015 11:37 am

Re: firmware 1.096 proble with start/stop command

Post by pepino » Thu Feb 12, 2015 12:59 pm

I'm looking forward to version 2.0 ... When do you think it will be available?
Will available in version 2.0 set/get start/stop counters via i2c?
Thank!

Post Reply