EPR and Fuse

Uninterruptible Power intelligent Supply Module
Post Reply
metaxas4
Posts: 12
Joined: Tue Dec 09, 2014 2:29 pm

EPR and Fuse

Post by metaxas4 » Thu Jan 15, 2015 12:43 pm

Do I need to connect a fuse to protect the EPR input from a 12V battery of electric wheelchair or not?

User avatar
Pimaster
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: EPR and Fuse

Post by Pimaster » Thu Jan 15, 2015 9:25 pm

Hi,
No, you do not need to connect anything to the EPR, there is already PTC fuse, Reverse Polarity Diode protection as also ESD protection. SO, Just use it as it is, and do not worry about polarity, if you connect it reverse, just will not work, nothing bad will happen.
Warmest Regards
Pi Master
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---

metaxas4
Posts: 12
Joined: Tue Dec 09, 2014 2:29 pm

Re: EPR and Fuse

Post by metaxas4 » Fri Jan 16, 2015 3:47 pm

thanks.

Post Reply