Support for the UPS PIco HV3.0A, HV3.0B and HV3.0B+, as also Terminal Block products, SD images also for updated hardware HV3.0A/B/B+
2 posts • Page 1 of 1
Hi running raspian new install all settings done a install guide the unit does everything it should not shortly after shutting down it restarts again after about 5 seconds and keeps doing this cycle. Has anyone any ideas as to why.
I have a similar issue. I have a RPi 3 running Jessie and kernel 4.4.34. The UPS PIco HV3 runs great with 0x24, which I have installed on about 10 units and have been running generally without issue for about a year. I'm looking at upgrading to 0x38, but want to make sure it's stable first. Functionally, it appears to work, but I can tell based on the "user leds" that the unit is restarting at least once a minute. This is problematic because I have a logging application that is leveraging the analog-in over i2c, and this feature is unavailable while the PIco is restarting. Does anyone have any thoughts on this?