Pico HV3.0A software, etc with Original UPS PIco?

Support for the UPS PIco HV3.0A, HV3.0B and HV3.0B+, as also Terminal Block products, SD images also for updated hardware HV3.0A/B/B+
Post Reply
User avatar
RDK_Pi
Posts: 53
Joined: Sun Nov 22, 2015 3:12 pm

Pico HV3.0A software, etc with Original UPS PIco?

Post by RDK_Pi » Fri Dec 22, 2017 9:38 am

Just wondering if I put an SD card from a PiV3B with a PIco HV3.0A UPS board and related software into a PiV2 unit with an HV3.0A or into a PiB+ with one of your original UPS PIco boards, will it work? Thanks....RDK
User avatar
Pimaster
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: Pico HV3.0A software, etc with Original UPS PIco?

Post by Pimaster » Fri Dec 22, 2017 10:58 am

Hi,
Yes. It is exactly the same firmware 110% compatible between them. Some extra features we added to the Version B, are recalled automatically as bootloader for the B has information on which version firmware is running. So, firmware is smart enough to know where it is running. Today at the veering we will release new data sheet with all features got B.
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Post Reply