Information about currents on I2C Registers

Support for the Uninterruptible Power Supply
with Peripherals and I2C control Interface
Raspberry Pi® B+, A+, B, and A
Post Reply
wopfi
Posts: 4
Joined: Sun May 21, 2017 3:43 pm

Information about currents on I2C Registers

Post by wopfi » Sun May 21, 2017 4:06 pm

Does the UPS PIco Plus measure currents (charging, input, raspberry pi)? And if so, is it planned to make this currents available over Registers?
User avatar
Pimaster
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: Information about currents on I2C Registers

Post by Pimaster » Thu Jun 22, 2017 2:05 am

Yes, It is but not this version UPS PIco HV1.1
It is implemented in the version HV3.0A and up
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
wopfi
Posts: 4
Joined: Sun May 21, 2017 3:43 pm

Re: Information about currents on I2C Registers

Post by wopfi » Tue Jun 27, 2017 7:44 am

Oh, sorry! I just noticed I posted in the wrong forum. I'm actually using a HV3.0A version. I will repost this question in the correct place.
Post Reply