Need help for installing with Arch Linux

Support for the Uninterruptible Power Supply
with Peripherals and I2C control Interface
Raspberry Pi® B+, A+, B, and A
Post Reply
Posts: 27
Joined: Tue Apr 18, 2017 3:40 pm

Need help for installing with Arch Linux

Post by MüMyPEE » Tue Apr 18, 2017 3:55 pm

Hi to all!

As totally new in Linux i would need urgent help to get the UPSPico running here on my needed Arch Linux for this project. I have got everything to work except the UPSPico.
The commands in manual are not working here. Can someone plz "translate" all the commands so i can use the installmanual with this Linux version?
I am totally lost and need a step by step howto...

For example:
sudo apt-get install python-rpi.gpio
sudo apt-get install git python-dev python-serial python-smbus python-jinja2 python-xmltodict python-psutil python-pip
cd ../upspico/picofssd

Thank you so far!

Kind Regards,
User avatar
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: Need help for installing with Arch Linux

Post by Pimaster » Tue Apr 18, 2017 4:38 pm

You have PIco HV3.0 and not HV1.1 so posted to wrong forum.
Please post it again to one of this one
Warmest Regards
Designing with Mentor Graphics PADS -
Please read and follow the PiForum rules
Post Reply