UPS Pico on Raspi3?

Support for the Uninterruptible Power Supply
with Peripherals and I2C control Interface
Raspberry Pi® B+, A+, B, and A
Post Reply
Bytechanger
Posts: 4
Joined: Sat Feb 27, 2016 10:13 pm

UPS Pico on Raspi3?

Post by Bytechanger » Fri Oct 07, 2016 7:29 am

Hi,

I´ve aleready the ups pico running on an raspberry 2.
Now I want to change to raspi3.
The reset pin is not at the same place.

Can I use the reset function, when I take a cable from reset pin place from ups pico to raspi3?
Where is the right place on raspi3?? Or is there no reset point at raspi3 ??

Greets

Byte
User avatar
Pimaster
Site Admin
Posts: 1615
Joined: Fri Sep 14, 2012 9:50 am

Re: UPS Pico on Raspi3?

Post by Pimaster » Mon Oct 10, 2016 6:26 pm

Hi,
You need to use a short cable to connect on the RPi 3 RUN pin
look here below

https://www.modmypi.com/blog/pico-ups-reset-wire
BR PiM
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Post Reply