New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
Hi, we are finally going to release the new Firmware 3.0 for the UPS PIco HV1.0 and HV1.1 based in 80 % on the new PIco HV3.0 firmware. It will be based on same Daemons.
Our questions are the following
1. We are planning to use the new addresses and allocations for the registers sets, that will cause users will need to re-write their
2. We will release an old firmware (still working with the old python script), adopted to the new kernel 4.9 no other changes will be implemented on this firmware
As the final firmware for the HV3.0 is mostly ready, we are going to copy most of it to the old PIco. Please write here any ideas or opinions about the ongoing developments. We expect to release it before 15 of September
Our questions are the following
1. We are planning to use the new addresses and allocations for the registers sets, that will cause users will need to re-write their
2. We will release an old firmware (still working with the old python script), adopted to the new kernel 4.9 no other changes will be implemented on this firmware
As the final firmware for the HV3.0 is mostly ready, we are going to copy most of it to the old PIco. Please write here any ideas or opinions about the ongoing developments. We expect to release it before 15 of September
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
The most important thing is that you release a new firmware (compatible with 4.9 kernel) as soon as possible. Please no more delays...
Therefore option 1 should be preferred.
Therefore option 1 should be preferred.
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
Hi,
Here are solution that make the old PIco working with the new kernel, before we upgrade the firmware
http://www.forum.pimodules.com/viewtopi ... =20&t=3442
Here are solution that make the old PIco working with the new kernel, before we upgrade the firmware
http://www.forum.pimodules.com/viewtopi ... =20&t=3442
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
Any news? It is clearly after 15 of SeptemberPimaster wrote:We expect to release it before 15 of September

Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
Hi,
On August 10, a probable release date of September 15 was announced. We have October 15 now
I will be visiting one of my remote installations in one week (about 800km from where I live) It would be nice if a new firmware would be available at that time, so I can perform the update while I am there.
Any chance it will be released by then, or should we simply give up waiting and look for another solution?
Thanks.
On August 10, a probable release date of September 15 was announced. We have October 15 now

I will be visiting one of my remote installations in one week (about 800km from where I live) It would be nice if a new firmware would be available at that time, so I can perform the update while I am there.
Any chance it will be released by then, or should we simply give up waiting and look for another solution?
Thanks.
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
seems that this project is abandoned...
no info, no post, nothing for very long time....
and the fw update never see any daylight, only a postponed date....
no info, no post, nothing for very long time....
and the fw update never see any daylight, only a postponed date....
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
Hi,
It is ready, just under hard testing a long time already. There ware some issues that was needed a hard testing with batteries and RTC reported directly to us.
Project has been not abandoned, a new version(s) of hardware and new products are under preparation
It is ready, just under hard testing a long time already. There ware some issues that was needed a hard testing with batteries and RTC reported directly to us.
Project has been not abandoned, a new version(s) of hardware and new products are under preparation
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
Hi,
Another month has passed by without any software release or update on its status
.
Can you please give us an HONEST answer: can we expect a (working) software release AT ALL in the near future
Thanks.
Another month has passed by without any software release or update on its status

Can you please give us an HONEST answer: can we expect a (working) software release AT ALL in the near future

Thanks.
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
It seems that this project is definitely abandond. pimaster always promises a new firmware ("finally going to release...") but there is NO new release.
It´s a shame, but it seems that it is time to look for other products.
It´s a shame, but it seems that it is time to look for other products.
Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1
This worked for me:
https://github.com/raspberrypi/firmware/issues/828
Post by Ghost on June 27
Good luck!
https://github.com/raspberrypi/firmware/issues/828
Post by Ghost on June 27
Good luck!